Pit
100 mm minimum: a simple recess in the slab, no deep pit.
A private lift can now be installed without major works, in new and existing houses. Footprint, power supply, regulations: here are the points to check, with the example of the SweetLIFT.

Low-speed private lifts such as the SweetLIFT fall under the Machinery Directive 2006/42/EC, not the Lifts Directive. In the European Union their speed is limited to 0.15 m/s; outside the European Union the SweetLIFT can run at 0.40 m/s.
100 mm minimum: a simple recess in the slab, no deep pit.
2,500 mm minimum ceiling height.
1.5 to 15 m, up to several floors.
225 to 400 kg, 3 to 6 people, wheelchair accessible.
A self-supporting structure, inside or outside the house, in the colour of your choice, glazed or solid.
A concrete or masonry shaft built by the contractor, ideal in a new house.
The home lift of our range, for houses and villas: installed without major works, with a 10 cm pit, and fully customisable.
Learn moreA machine-room-less lift designed for buildings short on space: pit reduced to 300 mm and top floor at 2,500 mm, on a single load-bearing wall.
Learn moreTwo cars from our range, delivered with your lift: Skincolor, with wood-effect or plain skinplate panels, and the brushed stainless steel car of the HYBRID.
Learn moreIt depends on local planning rules: an indoor installation usually needs none, an outdoor structure may require a declaration. Check with your local authority.
Yes: the 100 mm pit and self-supporting structure avoid major works. An opening in the floors is still needed to pass between storeys.
Lower speed and different rules: a private lift follows the Machinery Directive, a building lift the Lifts Directive and EN 81-20 and EN 81-50.

Since 2017, every new lift installed in Europe must comply with EN 81-20 (construction and installation) and EN 81-50 (design rules, calculations and tests of components). Here are the main requirements and how our lifts meet them.
Read the guide
Choosing between a machine-room-less lift and a lift with machine room mostly depends on the building: available space, an existing room, height and use. Here are the criteria that matter.
Read the guide
An accurate quote starts with good measurements. Here is what to measure on site, and the minimum pit and headroom values for each of our ranges.
Read the guide
Buying a lift in Europe for a site abroad means organising the quote, manufacturing, documents and transport well. Here is how we work.
Read the guideSend us your drawings: we study your project and send you a detailed offer.