Practical guides for your lift project
What you need to know before ordering a lift: regulations, choice of technology, the measurements to take and how an export project is organised.
Preparing your lift project
These guides cover what needs settling before a lift project: the EN 81-20 and EN 81-50 standards, choosing a lift with or without machine room, the shaft measurements to take before asking for a quote, the specifics of a private home and how an export purchase works.

EN 81-20 and EN 81-50: what they require
Since 2017, every new lift installed in Europe must comply with EN 81-20 (construction and installation) and EN 81-50 (design rules, calculations and tests of components). Here are the main requirements and how our lifts meet them.
Read the guide
Lift with or without machine room: how to choose
Choosing between a machine-room-less lift and a lift with machine room mostly depends on the building: available space, an existing room, height and use. Here are the criteria that matter.
Read the guide
Pre-study: the measurements to take before your request
An accurate quote starts with good measurements. Here is what to measure on site, and the minimum pit and headroom values for each of our ranges.
Read the guide
Home lift: what you need to know
A private lift can now be installed without major works, in new and existing houses. Footprint, power supply, regulations: here are the points to check, with the example of the SweetLIFT.
Read the guide
Exporting a lift: the step-by-step guide
Buying a lift in Europe for a site abroad means organising the quote, manufacturing, documents and transport well. Here is how we work.
Read the guideConnectivity, safety and hygiene

The connected lift: monitor and control remotely
Remote monitoring, 4G emergency alarm, calling the car from a smartphone: Sodimas and Edel solutions to reduce breakdowns and act faster, wherever the lift is.
Learn more
Lift safety and hygiene
Safe positioning, safety gear, touchless buttons, air purification: certified Sodimas components for the safety of users and technicians, in new lifts and modernisation.
Learn moreUnderstanding lifts
Lift types, cars, rated load, goods lifts and maintenance: the basics for making the right decisions.

What is a lift? Types, components and how it works
What a lift is, how it works and which types exist: electric traction, with or without machine room, hydraulic and home lifts. Components and safety devices.
Read the article
Lift car dimensions and accessibility
Minimum car sizes under EN 81-70 (types 1, 2 and 3), clear door width, finishes and car renovation: what to know before choosing.
Read the article
Lift load: kilograms, persons and car area
How a lift's load is calculated: 75 kg per person, maximum car area under EN 81-20, and why it pays to choose a load above your strict needs.
Read the article
How to choose a goods lift: 7 criteria
Use, load, travel, electric or hydraulic drive, applicable regulations, environment and installer: the criteria for choosing the right goods lift.
Read the article
Electric or hydraulic lift: how to choose
Electric traction or hydraulic lift: how they work, travel, speed, space required, energy use and recommended uses to make the right choice.
Read the article
Lift maintenance in Spain: what the ITC AEM 1 requires
Lift maintenance in Spain under the ITC AEM 1 (Royal Decree 355/2024): maintenance company visits, periodic inspections and the owner's obligations.
Read the articleTechnical notes for installers
Edel controllers, boards, drives and signalling: what to know before troubleshooting or ordering a part.

Lift out of service: the first checks
Lift out of service: the check sequence from the Edel troubleshooting manual (safety devices, landing doors, obstacles, reset) and when to call a technician.
Read the article
The electronic boards of the Edel K2 controller
Main board 64278, input/output board 64276 or 643VF, car board 64290, push-button and arrow boards: what each board does in the Edel K2 controller.
Read the article
How to choose an Edel lift push button
Button strip or single button, lighting and colour, finish, pictogram: the four criteria for ordering the right Edel lift push button first time.
Read the article
Identifying an Edel lift part before ordering
Where to find the code of an Edel part (board, push button, controller, motor) and what to note when it is unreadable, to order the right spare part.
Read the article
Edel K2 controllers: electric, hydraulic and gearless
How to read an Edel K2 controller designation: technology, direct or star-delta starting, re-levelling with doors open and contactor current rating.
Read the article
Car and landing signalling
Call acknowledgement light, direction arrow, gong and position display: what each lift signalling element is for and how to replace it without a mismatch.
Read the article
Fuji or Yaskawa: which drive for an Edel K2 controller?
Fuji FRENIC Lift with built-in automatic rescue, or Yaskawa with rescue provided by the building: how to choose the drive for an Edel K2 controller.
Read the articleMarkets
Importing a lift country by country: procedures, documents and practical advice.
A lift project?
Send us your drawings: we study your project and send you a detailed offer.
