Reduced pit and headroom
Top-floor headroom of 2,500 mm in new and existing buildings, 300 mm pit in existing buildings (1,000 mm in new ones).
A machine-room-less lift designed for buildings short on space: pit reduced to 300 mm and top floor at 2,500 mm, on a single load-bearing wall.

The Medium range is fixed to a single load-bearing wall: it fits easily into existing buildings as well as new ones and frees up floor space. Its Medium 2.5 version is our answer to the tightest shafts.
Top-floor headroom of 2,500 mm in new and existing buildings, 300 mm pit in existing buildings (1,000 mm in new ones).
All the mechanics are fixed to one wall: simple integration and more room in the shaft.
Gearless motor at the top of the shaft, no oil or grease; traction and suspension by flat polyurethane belt.
A belt stretched from the pit to the top of the shaft replaces the governor and its tension pulley: less equipment to install.
Frequency drive, automatic standby of signalling and lighting: close to 50% less energy than an equivalent conventional system.
QI Touch controller and SecureMax position sensor at SIL 3 level under EN 81-20.



| Rated load | 225 to 630 kg, 3 to 8 persons |
|---|---|
| Speed | 0.5 m/s (225 to 450 kg) · 0.6 m/s (300 to 450 kg) · 1 m/s (450 to 630 kg) |
| Power and supply | 2.5 kW on 230 V single phase · 3 or 4 kW on 400 V three phase |
| Maximum travel | 28 m |
| Minimum pit | 300 mm in existing buildings (EN 81-21) · 1,000 mm in new buildings (EN 81-20) |
| Top-floor headroom | 2,500 mm |
| Starts | 120 per hour |
| Access | Single or double |
| Doors | Automatic, clear opening 700, 800 or 900 mm, clear height 2,000 mm, primer or stainless finish |
| Control | QI Touch controller at the top floor |
| Machinery | Gearless at the top of the shaft, with counterweight |
Technical data of the Sodimas range. For any other load, speed or dimension, please ask us.
| 225 kg | 300 kg | 450 kg | 630 kg | |
|---|---|---|---|---|
| Persons | 3 | 4 | 6 | 8 |
| Shaft, single access (W × D) | 1250 × 1300 | 1350 × 1300 | 1500 × 1600 | 1600 × 1700 |
| Shaft, double access (W × D) | 1250 × 1400 | 1350 × 1400 | 1500 × 1700 | 1600 × 1800 |
| Car (W × D) | 700 × 1000 | 850 × 1000 | 1000 × 1300 | 1100 × 1400 |
| Clear opening | 700 | 700 | 800 | 900 |
Dimensions in mm. 225 and 300 kg: check local regulations for new buildings, as they are not compliant for new buildings in the European Union.
For 300 to 630 kg at 1 m/s on 400 V three phase (4 kW): 1,000 mm pit and 3,300 mm headroom in new buildings, 800 mm pit and 3,200 mm headroom in existing ones. 450 kg compliant with EN 81-70 type 1, 630 kg type 2.

The controller of the Sodimas range. It controls the machine, the doors, the signalling and all safety devices, and comes as standard in the Residential Pack and in our lifts.
Learn more
An absolute sensor on the car roof and a coded magnetic tape along the full height of the shaft: the QI Touch controller always knows the exact position and speed of the car.
Learn moreTwo cars from our range, delivered with your lift: Skincolor, with wood-effect or plain skinplate panels, and the brushed stainless steel car of the HYBRID.

Functional, contemporary design: skinplate wall panels, plain or two-tone finish, brushed stainless steel entrance and M3 half-column.
See the range
The standard HYBRID car: brushed stainless walls and door, white ceiling, half column with colour display. A clean base you can personalise.
See the range
Two loads, predefined dimensions and simplified installation: the standard residential lift of our range, for new and existing buildings.
See the range
The home lift of our range, for houses and villas: installed without major works, with a 10 cm pit, and fully customisable.
See the range
Export onlySimple, robust mechanics combined with QI Touch electronics: the best-value lift for volume projects, with or without a machine room.
See the range
For heavy loads and large volumes: a range of goods lifts designed like a machine tool, electric or hydraulic.
See the range
Vertical transport of the vehicle with its driver and passengers, where space does not allow an access ramp.
See the rangeYes. In existing buildings a 300 mm pit is enough, and top-floor headroom can go down to 2,500 mm.
Yes. We supply it in Spain and abroad, with documentation and technical support for installation.
Any maintenance company: the QI Touch controller uses an open protocol.
Send us your drawings: we study your project and send you a detailed offer.