
Gearless
Gearless motor for lower noise and energy use, or a quiet geared machine when the building has a machine room.
Complete lifts, made to measure in Europe, packed and shipped with the documents your bank and your freight forwarder need.
The ranges we supply, from the compact residential lift to the 5-tonne goods lift.

A machine-room-less lift designed for buildings short on space: pit reduced to 300 mm and top floor at 2,500 mm, on a single load-bearing wall.
See the range
Two loads, predefined dimensions and simplified installation: the standard residential lift of our range, for new and existing buildings.
See the range
The home lift of our range, for houses and villas: installed without major works, with a 10 cm pit, and fully customisable.
See the range
Export onlySimple, robust mechanics combined with QI Touch electronics: the best-value lift for volume projects, with or without a machine room.
See the range
For heavy loads and large volumes: a range of goods lifts designed like a machine tool, electric or hydraulic.
See the range
Vertical transport of the vehicle with its driver and passengers, where space does not allow an access ramp.
See the range
Gearless motor installed in the shaft: no machine room to build, less noise, lower energy use.
See the product
Quiet, vibration-free geared machine for buildings with a technical room.
See the product
For industry, logistics and retail, sized for the load and use.
See the product
For shopping centres, stations and public buildings, designed for the rise and passenger flow.
See the product
The complete electrical package, in stock: for our lifts, for the mechanical equipment of your choice or to modernise an existing lift.
See the product
Replace the controller, wiring and signalling of a lift in service with a complete electrical package, in stock. On request, we also supply a motor matched to the installation.
See the product
The controller is the heart of the lift: it controls the machine, the doors, the signalling and all safety devices. We supply controllers from our range and from our preferred partner, with their connected solutions.
See the product
Permanent-magnet gearless motors or geared machines, for new lifts and for replacing an existing machine.
See the product
The signalling that dresses your lift, in the car and on every floor, chosen with the electrical equipment.
See the productTechnology
The SODILIFT range covers the machine, the controller and the safety components. The components of our lifts are designed and manufactured in Europe.

Multitasking system, CAN bus communication, Quick Install wiring and guided commissioning. Compliant with EN 81-20 and EN 81-50, ready for connected monitoring.
Learn more
A sensor on the car roof and a coded magnetic tape in the shaft: the car position is always known, stops are accurate and the shaft has fewer parts.
Learn more
Gearless motor for lower noise and energy use, or a quiet geared machine when the building has a machine room.




We review your drawings and send a detailed offer, then a proforma invoice.
Lifts are made to measure in Europe. We track the availability dates.
Every crate is listed on a precise packing list, lift by lift.
Invoice, certificate of conformity, packing list and bank documents prepared for your bank and forwarder.
Components consolidated in Europe, then shipped from the port best suited to the project, CFR to the port of destination or FCA for your carrier. Export clearance by an approved customs representative.
We remain your contact until delivery, and afterwards for spare parts.
We organise sea freight to the port of destination, for example Barcelona – Algiers.
We hand the goods over at our consolidation point in Europe to the carrier appointed by your company.

Components come from several European manufacturers. They are consolidated and shipped from the most suitable port for the project, for example Barcelona or Valencia.
Export clearance is handled by an approved customs representative appointed by SODILIFT.
Yes, and escalators too. Tell us the use and the load: we will propose the right equipment.
Send us your drawings: we study your project and send you a detailed offer.