Guide-mounted machine
Machine and fixed point supported directly on the car and counterweight guides: fewer anchors in the building and no heavy supports.
Two loads, predefined dimensions and simplified installation: the standard residential lift of our range, for new and existing buildings.

Designed for housing, ALPHA Motion reduces interfaces with the building: the machine and fixed points rest on the guide rails, the car is isolated and all the wiring arrives pre-wired. On its standard loads and dimensions, it is our simplest offer to order.
Machine and fixed point supported directly on the car and counterweight guides: fewer anchors in the building and no heavy supports.
Fully isolated drive and decoupled car: less noise and vibration.
Pre-wired CAN Plug shaft wiring, pendant with connector, pre-wired governor and safety gear contact, separate inspection box.
Absolute car position by Limax sensor and QI Touch controller.
2,500 mm headroom with hinged car roof and 800 mm pit in existing buildings.
PEP Ecopassport certified: 9,563 kg CO₂-eq for a 630 kg lift serving 5 floors.




| Type | Machine-room-less, guide-mounted machine |
|---|---|
| Loading | 450 kg or 630 kg |
| Speed | 1 m/s |
| Travel | 30 m |
| Top-floor headroom | 3,300 mm or more in new buildings (fixed roof) · 2,500 to 3,300 mm with hinged roof, new or existing |
| Pit | 1,100 mm in new buildings · 800 mm in existing ones |
| Suspension | 7 ropes Ø 6.5 mm, 240 mm pulley, 2:1 roping |
| Access | Single or opposite |
| Doors | Automatic SD20, at landing or in shaft, fire-rated or not; brushed 304 stainless, engraved, linen or RAL 7032; category 1 vandal resistant |
| Controller | QI Touch, 55 mm flush SD20 Slim cabinet |
| Signalling | Surface-mounted panels; Blackpad landing boxes 80 × 185 × 12 mm, DOT matrix display |
| Standards | EN 81-20, EN 81-70, EN 81-28 |
Technical data of the Sodimas range. For any other load, speed or dimension, please ask us.
| 450 kg | 630 kg | |
|---|---|---|
| Car (W × D) | 1000 × 1300 | 1100 × 1400 |
| Shaft, single access | 1500 × 1600 | 1600 × 1700 |
| Shaft, double access | 1500 × 1700 | 1600 × 1800 |
| Doors (2-panel telescopic) | CO 800 | CO 900 |
Dimensions in mm.
Skincolor car as standard and, as an option, every car in the Sodimas range. Matching SD20 landing doors and Blackpad push buttons.

The controller of the Sodimas range. It controls the machine, the doors, the signalling and all safety devices, and comes as standard in the Residential Pack and in our lifts.
Learn more
An absolute sensor on the car roof and a coded magnetic tape along the full height of the shaft: the QI Touch controller always knows the exact position and speed of the car.
Learn moreTwo cars from our range, delivered with your lift: Skincolor, with wood-effect or plain skinplate panels, and the brushed stainless steel car of the HYBRID.

Functional, contemporary design: skinplate wall panels, plain or two-tone finish, brushed stainless steel entrance and M3 half-column.
See the range
The standard HYBRID car: brushed stainless walls and door, white ceiling, half column with colour display. A clean base you can personalise.
See the range
A machine-room-less lift designed for buildings short on space: pit reduced to 300 mm and top floor at 2,500 mm, on a single load-bearing wall.
See the range
The home lift of our range, for houses and villas: installed without major works, with a 10 cm pit, and fully customisable.
See the range
Export onlySimple, robust mechanics combined with QI Touch electronics: the best-value lift for volume projects, with or without a machine room.
See the range
For heavy loads and large volumes: a range of goods lifts designed like a machine tool, electric or hydraulic.
See the range
Vertical transport of the vehicle with its driver and passengers, where space does not allow an access ramp.
See the rangeOn its standard loads and dimensions everything is predefined: study, ordering and installation are faster.
Yes: with a hinged car roof, headroom can go down to 2,500 mm and the pit to 800 mm.
Yes, in Spain and abroad.
Send us your drawings: we study your project and send you a detailed offer.