Bespoke
Load, dimensions, handling equipment and finishes are defined for your use.
For heavy loads and large volumes: a range of goods lifts designed like a machine tool, electric or hydraulic.

Megalift serves industrial buildings, warehouses, shopping centres, schools, healthcare facilities, showrooms and high-end buildings: wherever size or load call for a large lift. Each lift is defined according to flows, frequency of use, loading method and environment (cold, humid, dusty, food industry).
Load, dimensions, handling equipment and finishes are defined for your use.
Fully bolted folded sheet metal, very little welding: the same design up to 5 tonnes.
Each lift is pre-assembled at the factory before shipping: fewer surprises on site.
Electric traction for long travel and heavy traffic; hydraulic for heavy loads over short travel.
Mechanical locking pawls at each floor, or a safety device when the load/area ratio exceeds table 7 of EN 81-20.
Automatic return to the lowest floor and re-levelling during loading.






| Electric with top machine room (4:1, ER6D machine) | Up to 5,000 kg · ≤ 1 m/s · 40 m travel · 12 floors · car area up to 9 m² |
|---|---|
| Electric machine-room-less (MRL 4:1, ER6D) | Up to 4,850 kg · ≤ 1 m/s · 40 m travel · 12 floors · car area up to 8.6 m² |
| Direct hydraulic (2VLD) | Up to 6,000 kg · ≤ 0.8 m/s · 6 m travel · 5 floors |
| Roped hydraulic (2VLM) | Up to 6,000 kg · ≤ 0.8 m/s · 25 m travel · 12 floors · car area up to 10.5 m² |
| Cabin | Width 1,500 to 2,700 mm, depth up to 5,000 mm, height 2,000 to 3,000 mm |
| Doors | Automatic 2, 3, 4 or 6 panels; clear opening 1,500 to 2,700 mm, height 2,000 to 3,000 mm |
| Minimum pit | 1,250 mm |
| Headroom | Car height + 1,250 to 1,600 mm depending on drive |
| Access | Single or through / opposite |
Technical data of the Sodimas range. For any other load, speed or dimension, please ask us.
The load to carry, load dimensions, loading method (forklift, pallet truck, manual), number of floors, travel and frequency of use.

A machine-room-less lift designed for buildings short on space: pit reduced to 300 mm and top floor at 2,500 mm, on a single load-bearing wall.
See the range
Two loads, predefined dimensions and simplified installation: the standard residential lift of our range, for new and existing buildings.
See the range
The home lift of our range, for houses and villas: installed without major works, with a 10 cm pit, and fully customisable.
See the range
Export onlySimple, robust mechanics combined with QI Touch electronics: the best-value lift for volume projects, with or without a machine room.
See the range
Vertical transport of the vehicle with its driver and passengers, where space does not allow an access ramp.
See the rangeUp to 5,000 kg electric and 6,000 kg hydraulic.
Electric suits long travel and heavy traffic; hydraulic suits heavy loads over short travel, especially with forklift loading.
Yes. The Megalift is pre-assembled at the factory and shipped with its installation documentation.
Send us your drawings: we study your project and send you a detailed offer.