Lift car dimensions and accessibility

The size of the car decides how many people fit, whether a wheelchair can get in and what load the lift can carry. Here are the reference values.

SODILIFT editorial team · Understanding lifts · Reading time: 5 min

Lift car dimensions and accessibility

Area, load and number of people go together

The car is the part of the lift that users see, and the one that defines its capacity. The EN 81-20 standard links the available car area to the rated load: a car cannot be made larger without reviewing the load, or vice versa. We explain this in detail in our article on lift load.

The three accessible car types in EN 81-70

The European standard EN 81-70 defines lift accessibility, including for wheelchair users. It sets three reference car sizes:

TypeRated loadMinimum car (width × depth)Use
Type 1450 kg1,000 × 1,250 mmOne wheelchair user
Type 2630 kg1,100 × 1,400 mmOne wheelchair user and a companion
Type 31,275 kg2,000 × 1,400 mmWheelchair and several people; allows turning inside

The clear door width must be at least 800 mm, and national rules may require more. In our ranges, the Medium 2.5 at 450 kg meets type 1 and at 630 kg type 2.

National and local rules

In addition to EN 81-70, building codes and accessibility regulations in each country set the dimensions of accessible lifts according to the type of building and the door layout. Check with your architect which rules apply to your project: they are the ones that count.

When space is tight

In many existing buildings, the shaft cannot take a fully accessible car. There are solutions: ranges for small shafts, bespoke cars, entrances at 90° or opposite. The first step is to measure the shaft properly; our pre-study guide explains which measurements to take.

Finishes

Finishes determine the perceived quality of the car: laminates, wood, brushed or mirror stainless steel, panoramic glass for a bright car. Some are chosen for the use: a goods lift or a hospital car needs impact-resistant, easy-to-clean walls.

Replacing or renovating the car

A new car is brighter and quieter, and sometimes roomier than an old one. But it does not always need replacing: renovating the floor, walls, lighting or operating panel is often enough to modernise it. We study it from photos and measurements.

A reference to confirm, a project to study? Send us photos or drawings: we will reply with a proposal.

WhatsApp Contact

Frequently asked questions

Does a wheelchair fit in a 450 kg car?

Yes, if the car measures at least 1,000 × 1,250 mm (EN 81-70 type 1): it takes one wheelchair user, without a companion.

Can I renovate the car without replacing the lift?

Yes. Floor, walls, ceiling, lighting and operating panel can be renovated while keeping the mechanics, if they are in good condition.

A lift project?

Send us your drawings: we study your project and send you a detailed offer.