Lift maintenance in Spain: what the ITC AEM 1 requires

Since 1 July 2024, the maintenance and inspection of lifts in Spain follow a new technical instruction. Here are the essentials.

SODILIFT editorial team · Understanding lifts · Reading time: 6 min

Lift maintenance in Spain: what the ITC AEM 1 requires

The framework: ITC AEM 1 "Ascensores"

Royal Decree 355/2024 of 2 April approved the complementary technical instruction ITC AEM 1 "Ascensores", in force since 1 July 2024. It governs the commissioning, modification, maintenance and inspection of lifts, as well as improving the safety of existing lifts. It replaces the instruction approved by Royal Decree 88/2013.

Maintenance frequency

Maintenance is carried out by an authorised maintenance company (empresa conservadora), with which the owner must have a contract:

  • Every four months: lifts in single-family homes and certain lifts in residential buildings with up to three stops serving no more than 20 dwellings.
  • Every month: all other lifts, with between 20 and 45 days between one visit and the next.

Periodic inspections

In addition to maintenance, an inspection body checks the lift periodically:

  • Every 2 years: industrial buildings and buildings open to the public.
  • Every 4 years: buildings with more than 20 dwellings or more than four floors.
  • Every 6 years: all other lifts.

Each autonomous community sets out the procedure for reporting these inspections: check the one for your region.

The owner's obligations

  • Keep the lift in good working order for as long as it is used.
  • Have a maintenance contract with a maintenance company.
  • Commission the periodic inspection, which the maintenance company itself cannot carry out.
  • Prevent the lift from operating if it is known not to offer safety guarantees.
  • Bear, according to the statutes and decisions of the owners' association, the mandatory safety upgrades.

Preventive and corrective maintenance

Preventive maintenance is the periodic visits: testing the safety chain, brakes and door protection, lubrication, adjustments and wear checks. Corrective maintenance restores the lift to working order after a fault, with small or large repairs.

Good preventive maintenance reduces corrective work. The parts that deteriorate most without maintenance are well known: traction ropes or belts, brakes, sheave bearings and shafts, oxidised electronic components, valves on hydraulic lifts and safety devices that trip for no reason.

Existing lifts

The ITC AEM 1 provides for measures to improve the safety of existing lifts, which are checked during inspections. A modernisation (controller, drive, doors, operating panels) is often the best opportunity to carry them out. We supply the equipment, and your installation or maintenance company fits it.

A reference to confirm, a project to study? Send us photos or drawings: we will reply with a proposal.

WhatsApp Contact

Frequently asked questions

Can the maintenance company carry out the periodic inspection?

No. The inspection is carried out by an inspection body and commissioned by the owner.

Do you supply the equipment to modernise a lift?

Yes: controllers, drives, motors, operating panels and spare parts. Your installation or maintenance company fits them, with our documentation and technical support.

A lift project?

Send us your drawings: we study your project and send you a detailed offer.