Why a push button is not ordered "by name"
In a photo, almost all push buttons look alike. What sets them apart are four characteristics to note on site, on the button in service.
1. Button strip or single button
Many Edel push buttons are button strips: several buttons on the same metal support, at a fixed pitch.
A strip cannot be replaced by single buttons, or the other way round: the cut-outs in the faceplate are different. A photo of the whole panel, taken from the front, avoids the mistake.
2. Illuminated or not, and in which colour
Most push buttons are illuminated. The lighting colour is not an aesthetic detail: it must be the same across the whole panel, otherwise the replaced button stands out immediately.
The most common colours are red and blue. Note the colour of the neighbouring buttons before ordering.
3. The finish
Chrome, white, black and gold are the most common finishes. Here again, consistency matters: a panel mixing chrome and gold is more noticeable than a button out of service.
4. The pictogram
Floor number, arrow, door open and door close, alarm. The alarm button is part of the safety system and is never replaced by an ordinary button.
For a floor button, note the exact marking as it appears: -1, 0 and G do not have the same engraving.
The touchless button
Edel offers a touchless push button, operated by bringing the hand close, without pressing. It is a hygiene solution, useful in hospitals or busy office buildings. It requires adapting the panel: worth studying before deciding.


